Question 1

In the Learning-Curve Coefficients table for 70% learning, the sixth unit has a unit time value of 0.398. Verify that table entry by use of the logarithmic formula. Use five decimals in your work.

Accepted Answer

The answer of In the Learning-Curve Coefficients table for 70%...

Question 2

A small manufacturer that offers "hand crafted" furniture has developed a new style of desk that they believe will be very successful in the marketplace. It is expected that the first desk will take about 60 hours of craftsmen's time to complete. They expect a 90% learning curve for this desk.
How long will it take to make the 20th desk? The firm is considering accepting an order for 25 desks. How many hours of labour will this require for all 25?

Accepted Answer

The answer of A small manufacturer that offers "hand crafted"...

Question 3

Two manufacturers have very different learning rates; one is under 70% while the other is over 80%. What factors might lead to such a gap?

Accepted Answer

The answer of Two manufacturers have very different learning rates;...

Question 4

In the logarithmic approach to learning curve calculations, you have used the formula T_N = T₁. (N^b). For a problem with a 92% learning rate, what is b?

Accepted Answer

The answer of In the logarithmic approach to learning curve...

Question 5

A certain product under development took 200 hours for the production of its 2nd unit and 180 hours for its 4th unit.
a. What is the learning rate?
b. How much time did the first unit take?
c. How much time would the production of the 10th unit take? (Use both the logarithmic and the Table E.3 (in the text) approach. Do the two versions agree?)

Accepted Answer

The answer of A certain product under development took 200...

Question 6

The Learning-Curve Coefficients table reports that for 70% learning, the eighth unit has a unit time value of 0.343. Verify that table entry by use of the arithmetic method.

Accepted Answer

The answer of The Learning-Curve Coefficients table reports that for...

Question 7

You are about to undertake manufacture of a labour-intensive electronics component. The first unit took 300 hours. You are not sure whether the learning rate is 70% or 80%. The initial phase of the contract calls for 6 of these components.
a. How much time will it take to complete all six at 70% learning?
b. How much time will it take to complete all six at 80% learning?

Accepted Answer

The answer of You are about to undertake manufacture of...

Question 8

What cautions are in order when using learning curves?

Accepted Answer

The answer of What cautions are in order when using...

Question 9

Your firm has expertise with a special type of hand-finished furniture. The learning rate is known to be 82%. If the first piece of furniture took 6 hours, estimate how long it will take to complete the third unit.

Accepted Answer

The answer of Your firm has expertise with a special...

Question 10

Your firm has expertise with a special type of hand-finished furniture. The learning rate is known to be 82%. If the first piece of furniture took 6 hours, how long will it take to do the second? How long will it take to do the fourth?

Accepted Answer

The answer of Your firm has expertise with a special...

Question 11

Identify one advantage and one disadvantage of the arithmetic approach over the logarithmic approach to learning curve calculations.

Accepted Answer

The answer of Identify one advantage and one disadvantage of...

Question 12

Your firm has expertise with a special type of hand-finished furniture. The learning rate is known to be 82%. If the first piece of furniture took 6 hours, use the logarithmic approach to determine how long it will take to do the third unit.

Accepted Answer

The answer of Your firm has expertise with a special...

Question 13

In the logarithmic approach to learning curve calculations, you have used the formula T_N = T₁. (N^b). Your manager shows you a problem for which b is specified as -.18442. What learning rate does that value represent?

Accepted Answer

The answer of In the logarithmic approach to learning curve...

Question 14

Your company is making experimental turbochargers for a new design of high-powered farm tractors. The production schedule for these new components is contained in the table below.
 $$\begin{array} { | c | c | } 
\hline \text { Month } & \text { Turbochargers } \
\hline 1 & 4 \
\hline 2 & 6 \
\hline 3 & 7 \
\hline 4 & 8 \
\hline 5 & 5 \
\hline
\end{array}$$ The first turbocharger, a trial unit, took 900 hours to produce. Based on your experience with similar products, the learning factor is 85%. You have 20 employees, and each employee works 160 hours per month. How many hours will be required in each month? In which month(s) will overtime be required to meet the production schedule?

Accepted Answer

The answer of Your company is making experimental turbochargers for...

Question 15

A contractor builds large ships for the Department of Defence. A recent contract called for 12 amphibious landing platforms. It was originally estimated that the first of these would cost $1 billion and that 80% learning would be appropriate. In fact, the first ship cost $1.6 billion and the second $1.12 billion. What is the revised learning rate? What will be the total cost of the twelve ships? Is it higher or lower than the original estimates? If the defence department cuts the contract from 12 ships to 9, what happens to the average cost per ship?

Accepted Answer

The answer of A contractor builds large ships for the...

Question 16

What can cause a learning curve to vary from a smooth downward slope?

Accepted Answer

The answer of What can cause a learning curve to...

Question 17

The first unit took 79 hours; the tenth took 46 hours. What learning rate is implied by the data?

Accepted Answer

The answer of The first unit took 79 hours; the...

Question 18

Explain how learning curves might be applied in a bid preparation application.

Accepted Answer

The answer of Explain how learning curves might be applied...

Question 19

Your firm has a contract to make 20 specialty lenses for night vision equipment. The first one took 40 hours. Learning is expected at the 85% rate. How long will it take to finish all 20 units?

Accepted Answer

The answer of Your firm has a contract to make...

Question 20

Explain how learning curves might be applied in a scheduling application.

Accepted Answer

The answer of Explain how learning curves might be applied...

Quiz 22: Learning Curves

In the Learning-Curve Coefficients table for 70% learning, the sixth unit has a unit time value of 0.398. Verify that table entry by use of the logarithmic formula. Use five decimals in your work.

Two manufacturers have very different learning rates; one is under 70% while the other is over 80%. What factors might lead to such a gap?

In the logarithmic approach to learning curve calculations, you have used the formula TN = T1. (Nb). For a problem with a 92% learning rate, what is b?

The Learning-Curve Coefficients table reports that for 70% learning, the eighth unit has a unit time value of 0.343. Verify that table entry by use of the arithmetic method.

What cautions are in order when using learning curves?

Your firm has expertise with a special type of hand-finished furniture. The learning rate is known to be 82%. If the first piece of furniture took 6 hours, estimate how long it will take to complete the third unit.

Your firm has expertise with a special type of hand-finished furniture. The learning rate is known to be 82%. If the first piece of furniture took 6 hours, how long will it take to do the second? How long will it take to do the fourth?

Identify one advantage and one disadvantage of the arithmetic approach over the logarithmic approach to learning curve calculations.

Your firm has expertise with a special type of hand-finished furniture. The learning rate is known to be 82%. If the first piece of furniture took 6 hours, use the logarithmic approach to determine how long it will take to do the third unit.

In the logarithmic approach to learning curve calculations, you have used the formula TN = T1. (Nb). Your manager shows you a problem for which b is specified as -.18442. What learning rate does that value represent?

What can cause a learning curve to vary from a smooth downward slope?

The first unit took 79 hours; the tenth took 46 hours. What learning rate is implied by the data?

Explain how learning curves might be applied in a bid preparation application.

Your firm has a contract to make 20 specialty lenses for night vision equipment. The first one took 40 hours. Learning is expected at the 85% rate. How long will it take to finish all 20 units?

Explain how learning curves might be applied in a scheduling application.

In the logarithmic approach to learning curve calculations, you have used the formula T_N = T₁. (N^b). For a problem with a 92% learning rate, what is b?

In the logarithmic approach to learning curve calculations, you have used the formula T_N = T₁. (N^b). Your manager shows you a problem for which b is specified as -.18442. What learning rate does that value represent?