Question 1

The design firm has specified running trim which will be custom fabricated. What would this type of trim be specified for?

Accepted Answer

Trim used for a continuing length that must be installed in several pieces fitted end to end.

Question 2

The Smiths want to have as part of their kitchen cabinets an appliance garage with tambour doors. Which of the following materials fulfills this choice?

Accepted Answer

Doors that roll up out of the way.

Question 3

The finish carpenter stated to the designer he would cope the trim wood he was working on. What does cope mean when applied to this situation?

Accepted Answer

To cut the end of one piece of trim to match the profile of the other piece of trim.
Also used: Coping, Coped

Question 4

The method by which a designer can have the largest selection of real wood patterns for a design project is through which of the following?

Accepted Answer

Veneers
The method by which a designer can have the largest selection of real wood patterns for a design project is through wood Veneers.

Question 5

The layer construction of lumber glued together which could be horizontal or vertical is called?

Accepted Answer

Laminated
The layer construction of lumber glued together which could be horizontal or vertical is called laminated.

Question 6

The wood extending from the pith of the tree to the sapwood and usually darker in color than the sapwood is called? This wood term describes:

Accepted Answer

Heartwood
The wood extending from the pith of the tree to the sapwood and usually darker in color than the sapwood is called Heartwood.

Question 7

A ________ is a deviation in the face of a piece of wood from a straight line drawn from edge to edge. It is measured at the point of greatest distance from the straight line.

Accepted Answer

Cup
A cup is a deviation in the face of a piece of wood from a straight line drawn from edge to edge. It is measured at the point of greatest distance from the straight line.

Question 8

What is the definition of Millwork?

Accepted Answer

Ready-made products that are manufactured a woodworking plant or mill.

Question 9

When stated for shipping FOB factory/freight prepaid. What does this stand for?

Accepted Answer

The buyer owns the items in transit and the freight has been paid in advance or by shipper.
FOB= Free on Board

Question 10

In scheduling a midsize design project why is a bar chart used?

Accepted Answer

It is simple to make, and easy to use.
A bar chart is common and the easiest method used to schedule both design and construction.

Question 11

Hardwoods: Red Alder, Beech, Birch, Cherry, Maple are all examples of __________grain.

Accepted Answer

Closed
Hardwoods: Red Alder, Beech, Birch, Cherry, Maple are all examples of closed grain.

Question 12

The Johnsons are remodeling their kitchen. They want the designer to show them cabinets that will be keep within the tight allowance budget the builder has given them. Which cabinet selection below would NOT fit into the budget allowance?

Accepted Answer

Inset Flush Door
The Inset Flush doors/drawers cost more due to their construction. The work to inset the door is precision work and is charged more.

Question 13

The clients live in a dry part of the country and are going to be building a new home in a tropical location. They have asked their local designer to design their new homes interiors. The designer needs to specify the kitchen cabinets that will work for the environment. Which of the following are the best choices?

Accepted Answer

Mahogany Veneer over composite full overlay door, and European style box
The solid wood doors will warp in the humid air, the inset doors will expand in the humid air and not open properly, the miter joints can open in the humid air. The veneer over the composite material is a stable door in a more humid climate.

Question 14

ABC Window and Door Company have been requested to bid on the windows for the new school project. The company needs a copy of the window schedule that shows: Dimensions, Finish, Coding, Amount, Manufacturer, and:

Accepted Answer

Type
This would mean that the builder or owner would have the amount of windows required and the type of window to get the necessary costing thereof. All window schedules plans are printed separately

Question 15

The design coordinator for the new law offices requested to have pieces of the wood finish for the tables ordered for the conference room. The client wanted to make sure the tables ordered match the wainscot paneling in the same room. The vender provided the stain along with wood pieces for other desks on the office plan. As a group these are referred to as _____________?

Accepted Answer

Submittals
Venders may have to provide other types of submittals such as updates to designer/client on delivery schedule. In some cases it could be a mockup of the product they are providing or construction features.

Question 16

When a designer provides detail drawings what does their purpose serve?

Accepted Answer

To show the quality of joinery expected.

Question 17

A method of estimating is called the stick method and still used by many contractors today even though it's not as timely on getting a bid out. All of the following are processes of the stick method of estimating except:

Accepted Answer

Standard labor and material costs are established for each item.

Question 18

Choosing paint finishes is a normal part of most interior designer's job description. Paint finishes come in varying degrees on the gloss meter. Knowing the gloss factor on a 60 degree gloss meter helps in choosing the paint finish to use in many situations. Which gloss factor represents an Eggshell Finish?

Accepted Answer

20 - 30
The Eggshell Finish falls in the 20 - 30 on a 60 degree gloss meter.

Question 19

Fabrics are measured in their wear by a double rub test. What test is the measurement for this?

Accepted Answer

ASTM D4157
American Society for Testing and Materials (ASTM)

Question 20

The Designer needs to specify the best finish for the paint in the kitchen. The customer likes to cook a lot of greasy goods so they want a paint finish that is easy to clean. Which paint finish should the designer choose for the best cleaning of the choices given?

Accepted Answer

The semi-gloss finish is more stain resistant and easier to clean than a flat or eggshell finish. It is often used in kitchen & bathroom walls, woodwork and trims and high traffic areas.

Quiz 1: Interior Design