Question 1

Refer to the exhibit.  An administrator wants to verify the operation of MultiZone in a network. The administrator uses the command show ap debug multizone to generate the output shown in the exhibit. Based on the output, which statement is true?

Accepted Answer

The answer of Refer to the exhibit.  An administrator...

Question 2

Refer to the exhibit.  An administrator implements the MultiZone feature. The administrator sets up five zones as shown in the exhibit. Zone A has six controllers that form a cluster. Zone B has three controllers that form a cluster. Zones C, D, and E have a single standalone controller each. A total of 13 VAPs are created across the five zones. A zone needs to accept RAP connections from branch offices. All zones have the same AP Group name. One of the zones will not accept connections from the MultiZone APs. What could be a cause of this problem?

Accepted Answer

The answer of Refer to the exhibit.  An administrator...

Question 3

An administrator moves an AP from Campus 1 to Campus 2. At the Campus 2, the moved AP does not connect to a controller and download an AP Group configuration. Which process should the administrator perform to reset the AP back to its initial default state?

Accepted Answer

The correct process to reset an AP back to its initial default state is to execute the "factory_reset" command from apboot mode.

Question 4

An administrator implements blacklisting of users that fail authentication functions three or more times. By default, how long will these users have to wait before they can successfully log into the network again?

Accepted Answer

The answer of An administrator implements blacklisting of users that...

Question 5

A branch office location has two buildings: an office and a small warehouse that are within 20 meters of each other. A RAP at the branch office provides connectivity to the corporate office network. This RAP is also configured as a Remote Mesh Portal (RMP). Which solution should the administrator implement to provide connectivity between the office and small warehouse buildings at the branch office location?

Accepted Answer

A Mesh Point AP in the warehouse can connect wirelessly to the Remote Mesh Portal in the office, providing the needed connectivity between the two buildings.

Question 6

An administrator wants to change the default roles for the pre- and post-authentication user roles for a WLAN on a Mobility Master (MM). The controllers in the network perform all authentication. Under the Managed Network hierarchy, where can the administrator assign these roles?

Accepted Answer

The answer of An administrator wants to change the default...

Question 7

An administrator supports Aruba Mobility Controllers (MCs) managed by a Mobility Master (MM) in a non-cluster deployment. The administrator performs these tasks on the MM for the MCs: Enables L3 IP mobility for the respective VAPs on the MCs Creates a L3 domain and places the MCs in the domain However, roaming does not work when users roam from an AP connected to one controller in the domain to an AP connected to a different controller in the domain. What must the administrator do to fix this problem?

Accepted Answer

The answer of An administrator supports Aruba Mobility Controllers (MCs)...

Question 8

Which Aruba Unified Communications and Collaboration (UCC) deployment mode should be used when UCC is disabled on the Mobility Controllers (MCs)?

Accepted Answer

The answer of Which Aruba Unified Communications and Collaboration (UCC)...

Question 9

An administrator manages an Aruba wireless network. ClearPass is used to centralize AAA functions. The administrator wants to implement server role derivation. Which information will the ClearPass server return in regards to the user role assignment?

Accepted Answer

The answer of An administrator manages an Aruba wireless network....

Question 10

Which network components are tracked by Aruba Clarity? (Choose two.)

Accepted Answer

Aruba Clarity tracks wireless associations and DNS lookups to monitor and troubleshoot network performance issues.

Question 11

Refer to the exhibit.  An administrator implements an L2 cluster of Aruba Mobility Controllers (MCs) as shown in the exhibit. An external RADIUS AAA server authentication clients associated with the Active User Anchor Controller (A-UAC), where the NAS IP address sent from Controller B is 10.254.1.2. By default, what happens to the user's session when it is handed over to the Standby UAC (S-UAC) after a failover?

Accepted Answer

The answer of Refer to the exhibit.  An administrator...

Question 12

Refer to the exhibit.  An administrator wants to centralize administrative access to the Aruba Mobility Controllers (MC) and Mobility Master (MM). ClearPass is set up and the preferred authentication protocol is TACACS+. Where should the administrator perform this configuration in the MM hierarchy shown in the exhibit?

Accepted Answer

The answer of Refer to the exhibit.  An administrator...

Question 13

An administrator adds local administrative accounts to manage the Aruba Mobility Controllers (MCs). Which role should be assigned to an administrator who needs to only generate reports and monitor WLANS and ports?

Accepted Answer

The "network-operations" role is typically assigned to administrators who need to monitor the network and generate reports without making configuration changes.

Question 14

An administrator implements a ClearPass solution to authenticate Aruba wireless users. The Aruba wireless solution is an ArubaOS 8.x Mobility Master (MM) deployment. ClearPass sends an Aruba VSA role name for an authenticated user. However, the administrator notices that the role assigned to the user is different from the one assigned by the ClearPass server. Which two items should the administrator verify that might be the cause of this problem? (Choose two.)

Accepted Answer

The answer of An administrator implements a ClearPass solution to...

Question 15

Which device can terminate to a cluster of Aruba Mobility Controllers (MCs) that run ArubaOS 8.x?

Accepted Answer

Remote Access Points (RAPs) can terminate to a cluster of Aruba Mobility Controllers running ArubaOS 8.x, allowing remote locations to connect securely to the corporate network.

Question 16

An administrator creates a User Rule for role derivation on the Mobility Master (MM). Which client information can an administrator specify to identify that a particular user should be assigned a different role from the initial role?

Accepted Answer

Role derivation can be based on the MAC address of the client, which is a unique identifier for network devices.

Question 17

An administrator needs to authenticate users connected to an ArubaOS-Switch where the switch authenticates the user, assigns the firewall policies to the user, and processes some of the users' traffic. Which connection method should the administrator configure on the ArubaOS-Switch?

Accepted Answer

The answer of An administrator needs to authenticate users connected...

Question 18

An administrator sets up a network scan set in AirWave to scan a subnet to identify devices for a firmware upgrade. The scan completes and AirWave successfully uses the SNMP credentials to validate SNMP access. However, SSH access fails and the administrator must manually configure the SSH credentials used for all of these devices. What should the administrator have done before running the network scan?

Accepted Answer

The answer of An administrator sets up a network scan...

Question 19

An administrator needs to implement multiple configuration changes on a set of Aruba Mobility Controllers (MCs) that involve both VLAN and interface configurations at the same time. The controllers are deployed in a cluster. How can the administrator accomplish this task?

Accepted Answer

The bulk configuration update feature allows administrators to create a template and deploy multiple configuration changes simultaneously across a cluster of controllers, ensuring consistency and efficiency.

Question 20

An administrator implements the MultiZone feature and uses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster. What must the administrator do to solve this problem?

Accepted Answer

The administrator must add the MultiZone APs to the data zone's CPSec whitelist to allow them to establish sessions with the data zone cluster.

Exam 17: Aruba Certified Mobility Associate Exam

Refer to the exhibit. An administrator wants to verify the operation of MultiZone in a network. The administrator uses the command show ap debug multizone to generate the output shown in the exhibit. Based on the output, which statement is true?

An administrator moves an AP from Campus 1 to Campus 2. At the Campus 2, the moved AP does not connect to a controller and download an AP Group configuration. Which process should the administrator perform to reset the AP back to its initial default state?

An administrator implements blacklisting of users that fail authentication functions three or more times. By default, how long will these users have to wait before they can successfully log into the network again?

An administrator wants to change the default roles for the pre- and post-authentication user roles for a WLAN on a Mobility Master (MM) . The controllers in the network perform all authentication. Under the Managed Network hierarchy, where can the administrator assign these roles?

Which Aruba Unified Communications and Collaboration (UCC) deployment mode should be used when UCC is disabled on the Mobility Controllers (MCs) ?

An administrator manages an Aruba wireless network. ClearPass is used to centralize AAA functions. The administrator wants to implement server role derivation. Which information will the ClearPass server return in regards to the user role assignment?

Which network components are tracked by Aruba Clarity? (Choose two.)

An administrator adds local administrative accounts to manage the Aruba Mobility Controllers (MCs) . Which role should be assigned to an administrator who needs to only generate reports and monitor WLANS and ports?

Which device can terminate to a cluster of Aruba Mobility Controllers (MCs) that run ArubaOS 8.x?

An administrator creates a User Rule for role derivation on the Mobility Master (MM) . Which client information can an administrator specify to identify that a particular user should be assigned a different role from the initial role?

An administrator needs to authenticate users connected to an ArubaOS-Switch where the switch authenticates the user, assigns the firewall policies to the user, and processes some of the users' traffic. Which connection method should the administrator configure on the ArubaOS-Switch?

An administrator needs to implement multiple configuration changes on a set of Aruba Mobility Controllers (MCs) that involve both VLAN and interface configurations at the same time. The controllers are deployed in a cluster. How can the administrator accomplish this task?