Question 1

RBI requires the commitment and cooperation of the
A) Total organization
B) Inspection
C) Maintenance
D) Materials engineering

Accepted Answer

RBI (Risk-Based Inspection) involves a comprehensive approach to managing the risks associated with an organization's assets. Therefore, it requires the commitment and cooperation of the entire organization to implement and maintain an effective RBI program. Inspection, maintenance, and materials engineering are all important components of RBI, but they alone cannot achieve the desired outcomes without the commitment and cooperation of the entire organization.

Question 2

The reduction in the ability of a component to provide its intended purpose of containment of Fluids
A) Deterioration
B) Damage
C) Degradation
D) Thinning

Accepted Answer

The answer of The reduction in the ability of a...

Question 3

Consequence is always __________ for safety aspects
A) Negative
B) Positive
C) Neutral

Accepted Answer

Consequence refers to the result or outcome of a particular action or event. In the case of safety aspects, negative consequences may include injuries or harm to individuals, damage to property, or environmental hazards. Positive consequences, such as improved safety measures or successful accident prevention, can result from taking proactive safety measures. However, in general, consequences related to safety are typically viewed as negative, as they represent potential risks or hazards to individuals or the broader community.

Question 4

______________ delineate initiating events and combinations of system
A) Event trees
B) Fault trees
C) Logic trees

Accepted Answer

Event trees delineate initiating events and combinations of system responses to analyze potential outcomes.

Question 5

Small hole, crack or rupture are examples of
A) Failure modes
B) Failure
C) Loss

Accepted Answer

Small hole, crack or rupture are examples of failure modes, which refer to the specific ways in which a system or component can fail.

Question 6

Termination of the ability of a system, structure, or component to perform its required function of containment of fluid (le loss of containment)
A) Failure
B) Risk
C) Outcome

Accepted Answer

The definition provided in the question is describing a failure of the system, structure, or component to perform its required function. Therefore, the correct choice is A) Failure. Choices B and C are not suitable as they do not specifically describe the situation of loss of containment.

Question 7

The following types of pressurized equipment and associated components covered by RBI
A) Rotating equipment
B) Turbines
C) Pressurized pumps

Accepted Answer

Rotating equipment is covered by RBI.

Question 8

An analytical tool that organizes and characterizes potential accidents in a logical and graphical manner
A) Event tree
B) Event
C) Outcome
D) Consequence

Accepted Answer

An event tree is an analytical tool that organizes and characterizes potential accidents in a logical and graphical manner. It is used to understand the consequences of various potential events or scenarios and to identify the best ways to prevent or mitigate them. It is a powerful tool for risk management and safety planning.

Question 9

The primary audience for RP 580 is
A) Inspection and materials engineering personnel
B) Maintenance personnel
C) Only inspection personnel
D) Only materials engineering personnel

Accepted Answer

The answer of The primary audience for RP 580 is
A)...

Question 10

Occurrence of a particular set of circumstances, is called an
A) Event
B) Consequence
C) Risk

Accepted Answer

An event refers to a specific circumstance or outcome that occurs, which can be either positive or negative. Consequence implies a result or effect that follows a particular action or decision, whereas risk refers to the possibility of harmful or negative consequences associated with a particular action or decision.

Question 11

Outcome of an event
A) Consequence
B) Risk
C) Event

Accepted Answer

An outcome of an event is a consequence, which can be positive or negative. A risk refers to the possibility of a negative outcome, not the outcome itself. An event is simply a happening or occurrence, but does not specifically refer to the outcome.

Question 12

The event may be
A) Singular or multiple
B) Certain or uncertain
C) Loss or gain
D) Negative or positive

Accepted Answer

The answer of The event may be
A) Singular or multiple
B)...

Question 13

Methods that use engineering judgment and experience as the bases for the analysis of probabilities and consequences of failure
A) Quantitative risk analysis
B) Qualitative risk analysis
C) Process hazard analysis

Accepted Answer

The answer of Methods that use engineering judgment and experience...

Question 14

Combination of the probability of an event and its consequence
A) Risk
B) Failure
C) Loss
D) Reduction

Accepted Answer

The combination of the probability of an event and its consequence is known as risk. Risk can be calculated and managed in order to minimize potential negative consequences.

Question 15

_____________ depict ways in which the system failures rep- resented in the event trees can occur.
A) Event trees
B) Fault trees
C) Logic trees

Accepted Answer

Event trees represent a graphical representation of the ways in which system failures can occur. They are used to identify the sequence of events that lead to a specific consequence or outcome. Fault trees, on the other hand, are used to identify the causes of specific outcomes and the likelihood of their occurrence. Logic trees are a form of decision tree that are used to represent complex decision-making processes.

Question 16

__________ is not a substitute for a process hazards analysis (PHA) or HAZOP
A) RBI
B) PHA
C) REM
D) HAZOP

Accepted Answer

The answer of __________ is not a substitute for a...

Question 17

Quantitative risk analysis logic models generally consist of ___________ and ______
A) Event tees and fault trees
B) Product trees and loss trees
C) Likelihood trees and consequence trees

Accepted Answer

Event trees and fault trees are commonly used in quantitative risk analysis to model the logic of potential events and their causes.

Question 18

A physical condition or a release of a hazardous material that could result from component failure and result in human injury or death, loss or damage, or environ- mental degradation
A) Hazard
B) Loss
C) Failure

Accepted Answer

This definition fits the criteria of a hazard, as it describes a potential danger to human life or the environment that could result from a component failure or release of a hazardous material. Loss and failure are related to hazards, but they do not encompass the full range of potential harm that can result.

Question 19

Limitation of any negative consequence or reduction in probability of a particular event
A) Mitigation
B) Reduction
C) Residual

Accepted Answer

The answer of Limitation of any negative consequence or reduction...

Question 20

____________ uses logic models depicting combinations of events
A) Quantitative risk analysis
B) Qualitative risk analysis
C) Process hazard analysis

Accepted Answer

The answer of ____________ uses logic models depicting combinations of...

Exam 2: Risk Based Inspection

RBI requires the commitment and cooperation of the

The reduction in the ability of a component to provide its intended purpose of containment of Fluids

Consequence is always __________ for safety aspects

______________ delineate initiating events and combinations of system

Small hole, crack or rupture are examples of

Termination of the ability of a system, structure, or component to perform its required function of containment of fluid (le loss of containment)

The following types of pressurized equipment and associated components covered by RBI

An analytical tool that organizes and characterizes potential accidents in a logical and graphical manner

The primary audience for RP 580 is

Occurrence of a particular set of circumstances, is called an

Outcome of an event

The event may be

Methods that use engineering judgment and experience as the bases for the analysis of probabilities and consequences of failure

Combination of the probability of an event and its consequence

_____________ depict ways in which the system failures rep- resented in the event trees can occur.

__________ is not a substitute for a process hazards analysis (PHA) or HAZOP

Quantitative risk analysis logic models generally consist of _____ and

A physical condition or a release of a hazardous material that could result from component failure and result in human injury or death, loss or damage, or environ- mental degradation

Limitation of any negative consequence or reduction in probability of a particular event

____________ uses logic models depicting combinations of events