Question 1

Andrei enabled the Live Migration feature of Hyper-V during its installation. He selects a virtual machine called VM1 within Hyper-V Manager and clicks on Move within the Actions pane. Next, he selects "Move the virtual machine's storage." Which of the following is true of this scenario?
A) VM1's virtual hard disk files will be moved to the destination server.
B) VM1's virtual machine configuration files will be moved to the destination server.
C) VM1's virtual hard disk files and virtual machine configuration files will be moved to the destination server.
D) VM1 will be copied to the destination server and renamed as VM2.

Accepted Answer

When selecting "Move the virtual machine's storage," only the virtual hard disk files are moved to the destination server, not the configuration files.

Question 2

Lehana is creating a new virtual machine using the New Virtual Machine Wizard. After choosing the name WindowsServer2019VM for her virtual machine, she proceeds to the next step. She chooses Generation 1 when prompted to pick the generation for the virtual machine. Which of the following reasons justifies Lehana's choice?
A) The generation of the virtual machine can be changed later, so this choice does not matter.
B) The guest operating system on the virtual machine is a 32-bit version of Windows 7.
C) The virtual machine will need to emulate a UEFI BIOS to provide faster boot time.
D) The virtual machine will need to emulate a Serial Attached SCSI disk.

Accepted Answer

Generation 1 virtual machines are designed to support 32-bit versions of Windows operating systems and older versions of Linux. Since Lehana's guest operating system is a 32-bit version of Windows 7, Generation 1 is the appropriate choice. The other options do not justify choosing Generation 1.

Question 3

Huong is the system administrator for a virtual machine that is used by over 500 employees. She wants to install some device drivers to enable support for a few hardware components. Before she installs the drivers, she wants to ensure that she can revert to the current version of the virtual machine if something goes wrong with the installation. Which of the following Hyper-V features should Huong use?
A) Replication
B) Nested virtualization
C) Live migration
D) Checkpoints

Accepted Answer

Checkpoints allow Huong to create a snapshot of the current state of the virtual machine before installing the device drivers. If anything goes wrong with the installation, she can easily revert to the previous state of the virtual machine. Replication provides redundancy by creating copies of the virtual machine on another server, but it does not allow for easy reversion to a previous state. Nested virtualization allows for running virtual machines within virtual machines, but it is not relevant to this scenario. Live migration allows for moving a running virtual machine from one physical host to another, but it does not provide a snapshot of the current state of the virtual machine.

Question 4

Deion is creating a new virtual machine using the New Virtual Machine Wizard. After choosing the generation for his virtual machine, he is prompted to select the memory and an optional choice to enable the use of dynamic memory. He consults a colleague, Kanesha, and they decide against enabling dynamic memory. What is the most likely reason that prompted this decision?
A) Deion chose Generation 2 in the previous step.
B) Deion intends to use this virtual machine in a nested virtualization configuration.
C) Deion allocates 1024 MB of startup memory, which is sufficient to run most operating systems.
D) Deion intends to run Windows Server 2019 on this virtual machine.

Accepted Answer

Dynamic memory is often disabled in nested virtualization configurations to ensure stability and performance, as fluctuating memory allocations can complicate or impair the nested environment.

Question 5

Isabella configures three virtual machines, VM1, VM2, and VM3, on a Windows Server 2019 host. The host and VM1 are connected to a physical switch (external virtual switch). VM1 and VM2 are connected to a private virtual switch. VM2 and the host are connected to an internal virtual switch. VM3 is not connected to any switch. Isabella is building an application that provides clients access to confidential financial information in a secure database. Isabella chooses to run the application on the host server and decides to implement an N-tier security design to protect the database. Where should Isabella place the database?
A) On the host server
B) On VM1
C) On VM2
D) On VM3

Accepted Answer

VM2 is the most secure location for the database because it is isolated from the external network by not being connected to the external virtual switch but can still communicate with the host and VM1 through the internal and private virtual switches, providing a controlled environment for sensitive data.

Question 6

Miguel is using the New Virtual Machine Wizard to create a new virtual machine for the first time. Which of the following statements is true if Miguel creates a virtual machine with default settings?
A) The virtual machine will be a Generation 1 virtual machine.
B) The virtual machine will be named VM1.
C) The virtual machine will have 4 GB of memory, which is expandable up to 36 GB.
D) The virtual machine will have a 127 GB dynamically expanding hard disk.

Accepted Answer

The default settings for a new virtual machine include a dynamically expanding hard disk with a size of 127 GB. The other options are not specified by default settings.

Question 7

You need multiple boot images on a WDS server, one for each operating system.

Accepted Answer

A single boot image on a WDS server can support the deployment of multiple operating systems; different operating system images are stored separately and are not determined by the boot image.

Question 8

Installing the Hyper-V role will install the Hyper-V hypervisor, Hyper-V Manager console, and Hy p er-V PowerShell cmdlets.

Accepted Answer

Installing the Hyper-V role will install all the mentioned components.

Question 9

Fareeda, a system administrator, is configuring the security settings for a Generation 2 virtual machine called VM1. She enables the Trusted Platform Module (TPM). Next, she wants to encrypt the virtual hard disks for VM1 so that other virtual machines are restricted from using these hard disks. If the virtual hard disks are successfully encrypted, which of the following statements must be true?
A) Secure Boot is disabled by default in Generation 2 virtual machines.
B) Fareeda enabled shielding in the security settings for VM1.
C) Fareeda selected the option to Encrypt state and virtual machine traffic.
D) BitLocker contains the encryption keys.

Accepted Answer

Option A is incorrect because Secure Boot is not disabled by default in Generation 2 virtual machines. 
Option C is incorrect because there is no such option to encrypt state and virtual machine traffic. 
Option D is incorrect because although BitLocker is used for encrypting the virtual hard disks, it does not contain the encryption keys.

Therefore, the correct answer is B because enabling shielding in the security settings of VM1 is what encrypts the virtual hard disks and restricts them from being used by other virtual machines.

Question 10

Live Migration cannot be enabled if the Hyper-V host operating system is joined to an Active Directory domain.

Accepted Answer

Live Migration can be enabled if the Hyper-V host operating system is joined to an Active Directory domain. However, some additional configuration may be required to ensure proper authentication and delegation between hosts.

Question 11

What is the advantage of using production checkpoints over standard checkpoints?
A) Production checkpoints are applied without shutting down the guest operating system.
B) Unlike production checkpoints, standard checkpoints use a backup service provided by the guest operating system.
C) Unlike standard checkpoints, production checkpoints are created automatically whenever a virtual machine starts.
D) Production checkpoints cause fewer problems than standard checkpoints when applied.

Accepted Answer

Production checkpoints are designed to be more consistent and reliable, causing fewer issues when applied compared to standard checkpoints, which can sometimes lead to data corruption or inconsistencies.

Question 12

Dmitry installs the Hyper-V role using the Add Roles and Features Wizard. Upon completion, he is prompted to reboot the computer. However, his computer reboots twice. Why does Dmitry's computer reboot the second time?
A) To allow Hyper-V to start the Kerberos protocol
B) To allow Hyper-V to start the host operating system
C) To add Hyper-V in a Type 2 configuration
D) To add Hyper-V in a Type 1 configuration

Accepted Answer

When installing the Hyper-V role, the computer is first rebooted to configure the initial settings. The second reboot is required to complete the installation process and allow Hyper-V to start the host operating system with the newly added role.

Question 13

Achelle Electronics purchases hardware to set up 25 servers. The IT department must deploy Windows Server 2019 on these machines. Which of the following Hyper-V features should Achelle Electronics use?
A) Replication
B) Live migration
C) Virtual machine templates
D) Windows Deployment Services

Accepted Answer

Windows Deployment Services (WDS) is a Microsoft server role that provides a centralized way to deploy Windows operating systems and other software to client computers over a network. It can be used to deploy Windows Server 2019 to the 25 servers that Achelle Electronics has purchased.

Question 14

Ananya is installing the Hyper-V role on a server. When prompted for the location of the virtual machine files, she changes the location from the default value to E:\VMs. Where will the virtual machine configuration files be stored?
A) C:\VMs
B) E:\VMs
C) E:\VMs\Virtual Machines
D) E:\VMs\Config Files

Accepted Answer

The answer of Ananya is installing the Hyper-V role on...

Question 15

Devansh creates a checkpoint on his virtual machine before making some Windows Registry changes. After making these changes, he runs a test to verify that the virtual machine is working as intended. He notices some unintended effects of the Registry changes. Devansh applies the checkpoint to revert the virtual machine to its state before the Registry changes were made. Which of the following is true of this scenario?
A) The modifications within the checkpoint file will be merged into the virtual hard disk.
B) Devansh can choose to reverse the Windows Registry modifications while retaining other modifications.
C) The checkpoint file that is used to reverse the changes will be deleted from the system.
D) The checkpoint file will replace the current virtual hard disk file.

Accepted Answer

Applying a checkpoint to revert a virtual machine to a previous state effectively rolls back all changes made after the checkpoint was created, including Windows Registry modifications. The checkpoint file itself is not deleted simply by being applied; it remains available for future use unless manually deleted by the user. Choices A, B, and D are incorrect because they either misrepresent how checkpoints work with virtual hard disks or suggest options that are not typically available when applying a checkpoint.

Question 16

Orana works for an organization that sets up several virtual machines on a day-to-day basis to be deployed for various clients. Orana is exploring various Hyper-V options that will simplify this process. Which of the following Hyper-V features should Orana use?
A) Replication
B) Live migration
C) Virtual machine templates
D) Production checkpoints

Accepted Answer

Virtual machine templates can be preconfigured with the necessary settings and software, making it easy to deploy new virtual machines quickly and consistently. Replication and live migration are useful features for high availability and disaster recovery, but they may not necessarily simplify the process of setting up new virtual machines. Production checkpoints may be useful for testing and development environments, but may not be the best option for deploying virtual machines for clients.

Question 17

Gyaltsen is a system administrator who is managing the operation of virtual machines at her company. One of her key responsibilities is to ensure maximum uptime of virtual machines. She uses replication to ensure this. She is configuring replication for a virtual machine called VM1 on SERVERX to be replicated to SERVERY. If the replication is successful, which of the following tasks did Gyaltsen most likely complete?
A) She enabled replication on SERVERX.
B) She enabled the Credential Security Support Provider protocol for replication on SERVERX.
C) She enabled the Kerberos protocol for replication on SERVERY.
D) She enabled replication on SERVERY.

Accepted Answer

The answer of Gyaltsen is a system administrator who is...

Question 18

To replicate a virtual machine, it is sufficient that replication is enabled on the Hyper-V host of the virtual machine that is being replicated.

Accepted Answer

For successful replication of a virtual machine, it must be enabled on both the source Hyper-V host (where the virtual machine is originally located) and the destination Hyper-V host (where the virtual machine is being replicated to).

Question 19

Minato has created multiple virtual machines. He is using the Virtual Switch Manager to configure virtual switches. He wants to create an external virtual switch that will allow Hyper-V to manage network requests from these different machines. The purpose of this is to optimize performance across the network. Which of the following options should Minato enable?
A) N-tier security
B) Single-root I/O virtualization
C) Hyper-V Extensible Virtual Switch protocol
D) Credential Security Support Provider

Accepted Answer

Single-root I/O virtualization (SR-IOV) is a technology that allows the efficient sharing of PCI Express devices with virtual machines. By enabling SR-IOV on an external virtual switch, Minato can optimize network performance for his virtual machines, as it allows them to bypass the virtual switch in the Hyper-V host, reducing overhead and improving data throughput.

Question 20

Freya notices some performance issues with an important Generation 2 virtual machine. She realizes that the issue is caused by the presence of other virtual hard disks on the same physical disk. She has another physical hard disk on her system that is currently underutilized. She decides to use this disk as a pass-through disk to enhance the performance of the virtual machine. If Freya was able to accomplish this task successfully, which of the following must be true?
A) Freya deleted the virtual disk from her system.
B) Freya changed the physical disk's settings to take it offline.
C) Freya removed the virtual hard drive from the virtual machine.
D) Freya used the Browse option under the virtual hard drive settings.

Accepted Answer

To use a physical disk as a pass-through disk in a virtual machine, the disk must first be taken offline in the host operating system to ensure exclusive access by the virtual machine.

Quiz 3: Implementing Hyper-V and Automated Server Deployment

Andrei enabled the Live Migration feature of Hyper-V during its installation. He selects a virtual machine called VM1 within Hyper-V Manager and clicks on Move within the Actions pane. Next, he selects "Move the virtual machine's storage." Which of the following is true of this scenario?

Miguel is using the New Virtual Machine Wizard to create a new virtual machine for the first time. Which of the following statements is true if Miguel creates a virtual machine with default settings?

You need multiple boot images on a WDS server, one for each operating system.

Installing the Hyper-V role will install the Hyper-V hypervisor, Hyper-V Manager console, and Hy p er-V PowerShell cmdlets.

Live Migration cannot be enabled if the Hyper-V host operating system is joined to an Active Directory domain.

What is the advantage of using production checkpoints over standard checkpoints?

Dmitry installs the Hyper-V role using the Add Roles and Features Wizard. Upon completion, he is prompted to reboot the computer. However, his computer reboots twice. Why does Dmitry's computer reboot the second time?

Achelle Electronics purchases hardware to set up 25 servers. The IT department must deploy Windows Server 2019 on these machines. Which of the following Hyper-V features should Achelle Electronics use?

Ananya is installing the Hyper-V role on a server. When prompted for the location of the virtual machine files, she changes the location from the default value to E:\VMs. Where will the virtual machine configuration files be stored?

Orana works for an organization that sets up several virtual machines on a day-to-day basis to be deployed for various clients. Orana is exploring various Hyper-V options that will simplify this process. Which of the following Hyper-V features should Orana use?

To replicate a virtual machine, it is sufficient that replication is enabled on the Hyper-V host of the virtual machine that is being replicated.