Question 1

While having a discussion, Technician A says that a dry metallic spray coat makes color appear darker and less silver.Technician B says with dry metallic spray coat, light reflection is nonuniform.Who is correct?
A) A only
B) B only
C) Both A and B
D) Neither A nor B

Accepted Answer

The answer of While having a discussion, Technician A says...

Question 2

All of the following angles are used to determine whether a color adjustment is necessary EXCEPT:
A) head-on
B) near specular
C) color face
D) side tone

Accepted Answer

"Color face" is not a recognized term for determining the need for color adjustments in the context of viewing angles such as head-on, near specular, or side tone. These terms are related to how light reflects off a surface and how color is perceived from different angles, which is important in various fields such as printing, painting, and digital display calibration.

Question 3

A(n) ______________________________ is a book containing information to help you match the paint color on the vehicle.

Accepted Answer

The answer of A(n) ______________________________ is a book containing information...

Question 4

What factors should you bear in mind when working with basecoat/clearcoat finishes?

Accepted Answer

The answer of What factors should you bear in mind...

Question 5

The ____ divides the horizontal surfaces of the vehicle into zones defined by character lines and moldings.
A) color tree
B) color face
C) spectrophotometer
D) zone concept

Accepted Answer

The zone concept divides the horizontal surfaces of a vehicle into zones defined by character lines and moldings, helping in the design and aesthetic structuring of the vehicle.

Question 6

A ____ is an unwanted shiny ring that appears around a pearl or mica paint repair.
A) halo effect
B) plotting color
C) side tone
D) color face

Accepted Answer

The correct term for an unwanted shiny ring that appears around a pearl or mica paint repair is "halo effect." This phenomenon occurs when the repaired area reflects light differently than the surrounding paint, creating a noticeable ring or halo.

Question 7

____ makes a multistage paint color appear a different tone when viewed at different angles.
A) Chroma
B) Metamerism
C) OEM color variance
D) Color flip-flop

Accepted Answer

Color flip-flop is the characteristic of some multistage paint colors to appear as different tones or colors when viewed from different angles. This effect is achieved through the use of special pigments and coatings.

Question 8

While having a discussion, Technician A says that spider webbing involves the use of a simple masking pattern to produce a custom paint effect.Technician B says that lace painting involves the use of a masking pattern to produce a custom paint effect.Who is correct?
A) A only
B) B only
C) Both A and B
D) Neither A nor B

Accepted Answer

The answer of While having a discussion, Technician A says...

Question 9

Which of the following statements is LEAST-Likely true?
A) Metallic colors must be stirred and mixed thoroughly before use.
B) High booth temperature slows paint flashing, which tends to darken a metallic because there is more time for the metal flakes to settle.
C) Cold booth temperature slows paint flashing
D) Metamerism is most often a problem when a painter varies from the paint formula during tinting operations

Accepted Answer

High booth temperature actually speeds up paint flashing, not slows it down. This can cause the metallic flakes to orient more quickly and potentially unevenly, affecting the final appearance. The other statements are generally accurate regarding paint application and effects.

Question 10

What variables control the different shades of metallic colors?

Accepted Answer

The answer of What variables control the different shades of...

Question 11

____ occurs when different light sources affect paint pigments differently.
A) Metamerism
B) OEM color variance
C) Plotting color
D) Color flip-flop

Accepted Answer

Metamerism is the phenomenon where colors appear differently under different lighting conditions due to the way light interacts with the pigments or dyes.

Question 12

Plotting will help you recognize changes in all of the following EXCEPT:
A) value
B) lumens
C) hue
D) chroma

Accepted Answer

Plotting can help recognize changes in value, hue, and chroma, which are all related to color properties. Lumens, however, measure light output and are not directly related to color properties that can be plotted for visual changes in the same way.

Question 13

____________________ contains the entire visible spectrum (all wavelengths) of light.

Accepted Answer

The answer of ____________________ contains the entire visible spectrum (all...

Question 14

_________________________ means a person cannot see all colors of the spectrum normally.

Accepted Answer

The answer of _________________________ means a person cannot see all...

Question 15

_________________________ involves the steps needed to make a new finish match the existing finish on a vehicle.

Accepted Answer

The answer of _________________________ involves the steps needed to make...

Question 16

The ______________________________ represents the intended color used when the vehicle was painted at the factory.

Accepted Answer

The answer of The ______________________________ represents the intended color used...

Question 17

Colors that are either greener or redder in cast LEAST-Likely include:
A) blues
B) yellows
C) greens
D) browns

Accepted Answer

The answer of Colors that are either greener or redder...

Quiz 29: Color Matching and Custom Painting

While having a discussion, Technician A says that a dry metallic spray coat makes color appear darker and less silver.Technician B says with dry metallic spray coat, light reflection is nonuniform.Who is correct?

All of the following angles are used to determine whether a color adjustment is necessary EXCEPT:

A(n) ______________________________ is a book containing information to help you match the paint color on the vehicle.

What factors should you bear in mind when working with basecoat/clearcoat finishes?

The ____ divides the horizontal surfaces of the vehicle into zones defined by character lines and moldings.

A ____ is an unwanted shiny ring that appears around a pearl or mica paint repair.

____ makes a multistage paint color appear a different tone when viewed at different angles.

While having a discussion, Technician A says that spider webbing involves the use of a simple masking pattern to produce a custom paint effect.Technician B says that lace painting involves the use of a masking pattern to produce a custom paint effect.Who is correct?

Which of the following statements is LEAST-Likely true?

What variables control the different shades of metallic colors?

____ occurs when different light sources affect paint pigments differently.

Plotting will help you recognize changes in all of the following EXCEPT:

____________________ contains the entire visible spectrum (all wavelengths) of light.

_________________________ means a person cannot see all colors of the spectrum normally.

_________________________ involves the steps needed to make a new finish match the existing finish on a vehicle.

The ______________________________ represents the intended color used when the vehicle was painted at the factory.

Colors that are either greener or redder in cast LEAST-Likely include: