When installing an optical drive,for a PATA interface set the jumper on the ____ of the drive.
A)rear
B)front
C)top
D)bottom

Question

Quizplus · Accepted Answer

When installing an optical drive with a PATA interface, the jumper should be set on the rear of the drive. This is because PATA drives use a jumper to set the drive as a master, slave or cable select device, and the jumper pins are typically located on the rear of the drive. Setting the jumper correctly enables the drive to function properly in the system.

When Installing an Optical Drive,for a PATA Interface Set the Jumper