An Engineer Used the Cisco IOS Show Ip Ospf Neighbor

An engineer used the Cisco IOS show ip ospf neighbor command and received the following output:

$\begin{array}{lclccl} \text {Neighbor ID }&\text { Pri} &\text { State} &\text { Dead Time }&\text { Address} &\text { Interface} \\3.3.3.3 & 1 &\text { FULL/DR }& 00: 00: 37 & 10.1 .13 .3 &\text { GigabitEthernet0/1/0 }\\4.4.4.4 & 1 & \text {FULL/BDR} & 00: 00: 34 & 10.1 .14 .4 & \text {GigabitEthernet0/2/0}\end{array}$

What does the state field tell us about the router with the Neighbor ID 4.4.4.4?

A) The neighbor state is full, and the neighbor is neither the designated router or backup designated router.
B) The neighbor state is full, and the neighbor is the backup designated router.
C) The neighbor state is full, and the neighbor is the designated router.
D) The neighbor state is 2-way, and the neighbor is neither the designated router or the backup designated router.