Your on-premises network has an IP address range of 11.11.0.0/16. Only IPs within this network range can be used for inter-server communication. The IP address range 11.11.253.0/24 has been allocated for the cloud. You need to design a VPC in AWS. The servers within the VPC should be able to communicate with hosts both on the Internet and on-premises through a VPN connection. What combination of configuration steps meets your needs? (Choose two)
A) Set up the VPC with an IP address range of 11.11.253.0/24.
B) Set up the VPC with an RFC 1918 private IP address range (e.g., 10.10.10.0/24), and set up a NAT gateway to do translation between 10.10.10.0/24 and 11.11.253.0/24 for all outbound traffic.
C) Set up a VPN connection between a VGW and an on-premises router, set the VGW as the default gateway for all traffic, and configure the on-premises router to forward traffic to the Internet.
D) Set up a VPN connection between a VGW and an on-premises router, set the VGW as the default gateway for traffic destined to 11.11.0.0/24, and add a VPC subnet route to point the default gateway to an Internet gateway for Internet traffic.
E) Set up the VPC with an RFC 1918 private IP address range (e.g., 10.10.10.0/24), and set the VGW to do a source IP translation of all outbound packets to 11.11.0.0/16.

Question

Quizplus · Accepted Answer

The Answer of Your on-premises network has an IP address range of 11.11.0.0/16. Only IPs within this network range can be used for inter-server communication. The IP address range 11.11.253.0/24 has been allocated for the cloud. You need to design a VPC in AWS. The servers within the VPC should be able to communicate with hosts both on the Internet and on-premises through a VPN connection. What combination of configuration steps meets your needs? (Choose two)
A) Set up the VPC with an IP address range of 11.11.253.0/24.
B) Set up the VPC with an RFC 1918 private IP address range (e.g., 10.10.10.0/24), and set up a NAT gateway to do translation between 10.10.10.0/24 and 11.11.253.0/24 for all outbound traffic.
C) Set up a VPN connection between a VGW and an on-premises router, set the VGW as the default gateway for all traffic, and configure the on-premises router to forward traffic to the Internet.
D) Set up a VPN connection between a VGW and an on-premises router, set the VGW as the default gateway for traffic destined to 11.11.0.0/24, and add a VPC subnet route to point the default gateway to an Internet gateway for Internet traffic.
E) Set up the VPC with an RFC 1918 private IP address range (e.g., 10.10.10.0/24), and set the VGW to do a source IP translation of all outbound packets to 11.11.0.0/16.

Your On-Premises Network Has an IP Address Range of 11