When checking the front ball joints on a vehicle that has the springs mounted on the lower control arms, a jack should be placed under the _____ to take the spring tension off the ball joint.
A)inboard end of the lower control arm
B)outboard end of the lower control arm
C)frame/unibody
D)strut rod

Question

Quizplus · Accepted Answer

When checking the front ball joints on a vehicle with the springs mounted on the lower control arms, placing a jack under the outboard end of the lower control arm is the correct method. This position allows the jack to support the arm and relieve the spring tension on the ball joint, enabling accurate inspection without the load of the vehicle's weight compressing the joint.

When Checking the Front Ball Joints on a Vehicle That