____ bracing is a continuous diagonal 1 *4 notched into the face of the studs, top plate, and sole plate at each corner of the building.
A) Let-in
B) Cut-in
C) Temporary
D) Metal

Question

Quizplus · Accepted Answer

Let-in bracing is a commonly used method of adding diagonal bracing to stud walls without the need for additional hardware or metal connectors. It involves notching a 1x4 board diagonally across the corner of the wall framing and inserting it into slots cut into the framing members. This creates a continuous brace that helps to resist lateral loads such as wind and earthquakes. Cut-in bracing is a similar method that involves cutting slots into the framing members and inserting diagonal boards or metal straps, but it is less common and may require additional hardware. Temporary bracing is used during construction to hold walls, floors, or roofs in place until they can be permanently secured, and is not a type of diagonal bracing. Metal bracing may be used in some applications, but let-in bracing is typically more cost-effective and easier to install.

____ Bracing Is a Continuous Diagonal 1 *4 Notched into the Face