Question 1

Which ports from a VPLEX Metro system must be zoned to the RPAs in order to install the VPLEX write splitter?
A) FE and BE ports
B) FE ports only
C) BE ports only
D) FA ports

Accepted Answer

The answer of Which ports from a VPLEX Metro system...

Question 2

What are the available file system states within an FLR-enabled file system?
A) Append-only, Locked, and Protected
B) Not-Locked, Append-only, Locked, and Expired
C) Append, No-append, Locked, and Protected
D) Protected, Not-Locked, Expired, and Protected

Accepted Answer

In an FLR-enabled file system, the available states are Not-Locked, Append-only, Locked, and Expired. These states manage file retention and access permissions.

Question 3

An administrator initially created a Thin Provisioned file system on Dell EMC Unity. They now want to change that file system (FS) to Thick Provisioned. What is a consideration?
A) Unmap/unmount the FS and use the Initial Configuration Wizard
B) The FS cannot be changed from Thin to Thick
C) Unmap/Unmount the FS and change FS properties
D) Convert the FS from Thin to Thick through Unisphere

Accepted Answer

Once a file system is created as Thin Provisioned on Dell EMC Unity, it cannot be changed to Thick Provisioned.

Question 4

When is the Open Replicator RecoverPoint session created for each replica volume in the Consistency Group (CG)?
A) CG is put into Image Access mode
B) CG is created
C) CG is enabled
D) CG is taken out of Image Access mode

Accepted Answer

When a Consistency Group (CG) is put into Image Access mode, an Open Replicator RecoverPoint session is created for each replica volume in the CG. This session is used to replicate data from the primary volume to the replica volume.

Question 5

Which VVol object stores a copy of a VM's memory pages when the VM is powered on?
A) Config
B) Memory
C) Data
D) Swap

Accepted Answer

The Swap VVol object stores a copy of a VM's memory pages when the VM is powered on, allowing for memory overcommitment and efficient memory management.

Question 6

When RecoverPoint is deployed with a VMAX splitter, what presents the virtual target and virtual remote devices?
A) RPAs
B) VMAX
C) Switch
D) Gatekeepers

Accepted Answer

RPAs (Remote Protection Appliances) present the virtual target and virtual remote devices when RecoverPoint is deployed with a VMAX splitter.

Question 7

For a RecoverPoint system with multiple clusters, how many gatekeepers are needed for each VMAX splitter/RecoverPoint-cluster combination?
A) 2
B) 8
C) 4
D) 16

Accepted Answer

The answer of For a RecoverPoint system with multiple clusters,...

Question 8

When designing an EMC RecoverPoint environment, what must be taken into account when a site consists of multiple VMAX splitters or multiple RecoverPoint clusters?
A) A total of 16 gatekeepers are required for each VMAX splitter/RecoverPoint cluster combination.
B) All gatekeepers must be connected to each VMAX splitter/RecoverPoint cluster combination with fixed paths.
C) A total of eight gatekeepers are required for each VMAX splitter/RecoverPoint cluster combination.
D) When the VMAX splitter/RecoverPoint cluster is connected through Fibre Channel only two gatekeepers must be used.

Accepted Answer

The answer of When designing an EMC RecoverPoint environment, what...

Question 9

A storage administrator is monitoring the pool Capacity of two identical Dell EMC Unity XT systems. Each system has every LUN replicated to the other system and all replication sessions are in sync. Both systems are used for production storage. CloudIQ is receiving updates from both systems, but shows that one of them is filling up more quickly than the other. What is a possible explanation for this behavior?
A) One of the Unity systems is used less than the other one.
B) Dell EMC Unity Data Reduction is not identically enabled on LUNs on both systems.
C) CloudIQ is not receiving the same amount of updates from one of the two systems.
D) Dell EMC Unity Data Reduction license is not enabled on one of the two systems.

Accepted Answer

Data Reduction might not be identically enabled on both systems, causing different storage consumption rates.

Question 10

A storage administrator needs to shrink their FAST Cache on a Dell EMC Unity XT storage system. The current configuration consists of six 400 GB SAS Flash 2 drives. What is the maximum number of drives that can be removed from FAST Cache through an online shrink operation?
A) 2
B) 4
C) 5
D) 6

Accepted Answer

FAST Cache on Dell EMC Unity XT systems can be shrunk online by removing up to two drives at a time.

Question 11

An organization is hosting storage protection solutions for multiple companies. This solution is accomplished by the hosting organization's ability to consolidate data to a single VNX platform. How many RecoverPoint clusters can be used in this environment?
A) 6 clusters, assuming each LUN is attached to only one cluster at a time
B) 6 clusters, assuming only vRPAs are used
C) 8 clusters, assuming each LUN is replicated across the clusters
D) 8 clusters, assuming each LUN is attached to only one cluster at a time

Accepted Answer

The answer of An organization is hosting storage protection solutions...

Question 12

Which Open Replicator mode is used by the RecoverPoint VMAX write splitter?
A) Modified Hot Push
B) Cold Push
C) Hot Pull
D) Cold Pull

Accepted Answer

The RecoverPoint VMAX write splitter uses the Modified Hot Push mode, which allows for real-time replication by pushing changes as they occur.

Question 13

What is an advantage of selecting Centralized ESRS over Integrated ESRS?
A) CloudIQ can be configured
B) Deploying an external virtual machine is not required
C) Centralized ESRS is easier to configure
D) Internet connectivity is not required for every Dell EMC Unity system

Accepted Answer

Centralized ESRS allows for a single point of internet connectivity for multiple systems, reducing the need for each system to have its own internet connection.

Question 14

What is the granularity of FAST VP when relocating data in the pool?
A) 128 MB
B) 256 MB
C) 512 MB
D) 1024 MB

Accepted Answer

The answer of What is the granularity of FAST VP...

Question 15

What can be used to initially configure a static management IPv6 address on a Dell EMC Unity array?
A) symcli
B) navisecCLI
C) uemcli
D) initCLI

Accepted Answer

uemcli is used to initially configure a static management IPv6 address on a Dell EMC Unity array.

Question 16

When is the Open Replicator RecoverPoint session created for each production volume in the Consistency Group (CG)?
A) CG is enabled
B) CG is created
C) LUN is attached to the splitter
D) LUN is added to an RSET

Accepted Answer

The Open Replicator RecoverPoint session is created for each production volume in the Consistency Group (CG) when the CG is enabled.

Question 17

A large data center is hosting storage protection solutions for multiple companies. This solution is accomplished by the hosting organization's ability to consolidate data to an environment with two VNX arrays. How many RecoverPoint clusters can be used in this environment?
A) 12 clusters, assuming each LUN is attached to only one cluster at a time
B) 6 clusters, assuming only vRPAs are used
C) 12 clusters, assuming each LUN is replicated across the clusters
D) 6 clusters, assuming each LUN is attached to only one cluster at a time

Accepted Answer

Each VNX array can support up to 6 RecoverPoint clusters.

Question 18

When creating a Consistency Group (CG), what is true of RecoverPoint/SE only?
A) All volumes of the array are displayed in the available volumes list.
B) Journal Compression may be used.
C) The CG must be created from Unisphere for RecoverPoint.
D) Journal volumes may be automatically provisioned.

Accepted Answer

The answer of When creating a Consistency Group (CG), what...

Question 19

When scheduling snapshots, what is the smallest snapshot frequency that can be selected?
A) Days
B) Hours
C) Minutes
D) Seconds

Accepted Answer

The answer of When scheduling snapshots, what is the smallest...

Question 20

What features are available with Dell EMC UnityVSA?
A) Synchronous and asynchronous replication
B) Fibre Channel and FAST cache
C) Data at Rest Encryption and VVols
D) FAST VP and asynchronous replication

Accepted Answer

The answer of What features are available with Dell EMC...

Exam 4: Unity Solutions Specialist Exam for Implementation Engineers

Which ports from a VPLEX Metro system must be zoned to the RPAs in order to install the VPLEX write splitter?

What are the available file system states within an FLR-enabled file system?

An administrator initially created a Thin Provisioned file system on Dell EMC Unity. They now want to change that file system (FS) to Thick Provisioned. What is a consideration?

When is the Open Replicator RecoverPoint session created for each replica volume in the Consistency Group (CG) ?

Which VVol object stores a copy of a VM's memory pages when the VM is powered on?

When RecoverPoint is deployed with a VMAX splitter, what presents the virtual target and virtual remote devices?

For a RecoverPoint system with multiple clusters, how many gatekeepers are needed for each VMAX splitter/RecoverPoint-cluster combination?

When designing an EMC RecoverPoint environment, what must be taken into account when a site consists of multiple VMAX splitters or multiple RecoverPoint clusters?

A storage administrator needs to shrink their FAST Cache on a Dell EMC Unity XT storage system. The current configuration consists of six 400 GB SAS Flash 2 drives. What is the maximum number of drives that can be removed from FAST Cache through an online shrink operation?

An organization is hosting storage protection solutions for multiple companies. This solution is accomplished by the hosting organization's ability to consolidate data to a single VNX platform. How many RecoverPoint clusters can be used in this environment?

Which Open Replicator mode is used by the RecoverPoint VMAX write splitter?

What is an advantage of selecting Centralized ESRS over Integrated ESRS?

What is the granularity of FAST VP when relocating data in the pool?

What can be used to initially configure a static management IPv6 address on a Dell EMC Unity array?

When is the Open Replicator RecoverPoint session created for each production volume in the Consistency Group (CG) ?

A large data center is hosting storage protection solutions for multiple companies. This solution is accomplished by the hosting organization's ability to consolidate data to an environment with two VNX arrays. How many RecoverPoint clusters can be used in this environment?

When creating a Consistency Group (CG) , what is true of RecoverPoint/SE only?

When scheduling snapshots, what is the smallest snapshot frequency that can be selected?

What features are available with Dell EMC UnityVSA?