Technical Drawing for Engineering Communication

Engineering

Quiz 13 :

Fasteners

Quiz 13 :

Fasteners

Question Type
search
arrow
A bolt is a fastener that is a steel rod with threads at both ends.
Free
True False
Answer:

Answer:

False

Tags
Choose question tag
close menu
arrow
This thread form is used primarily to transmit power.
Free
Multiple Choice
Answer:

Answer:

D

Tags
Choose question tag
close menu
arrow
Pitch is the distance from one point on a thread to the corresponding point on the adjacent thread as measured perpendicular to its axis.
Free
True False
Answer:

Answer:

False

Tags
Choose question tag
close menu
arrow
Rivets are permanent fasteners, usually used to hold sheet metal together.
True False
Answer:
Tags
Choose question tag
close menu
arrow
If you have a 1/4 - 20 UNC threaded screw and rotate it ten full turns, the end will travel 1/2".
True False
Answer:
Tags
Choose question tag
close menu
arrow
The minimum full thread length for a screw or stud in aluminum is:
Multiple Choice
Answer:
Tags
Choose question tag
close menu
arrow
A right-hand thread rotates in a counterclockwise direction.
True False
Answer:
Tags
Choose question tag
close menu
arrow
Taps are used to cut external threads; dies are used to cut internal threads.
True False
Answer:
Tags
Choose question tag
close menu
arrow
A nut that is tightened onto a left-hand thread must be turned to the right.
True False
Answer:
Tags
Choose question tag
close menu
arrow
A 5115 series retaining ring would be recommended to provide rigid end play take-up.
True False
Answer:
Tags
Choose question tag
close menu
arrow
A screw is a threaded fastener that does not use a nut and is screwed directly into a part.
True False
Answer:
Tags
Choose question tag
close menu
arrow
The housing diameter for an internal series N5000-25 ring is:
Multiple Choice
Answer:
Tags
Choose question tag
close menu
arrow
Spring pins are slightly larger in diameter than the hole into which they are inserted.
True False
Answer:
Tags
Choose question tag
close menu
arrow
The depth of a thread is figured by measuring the distance between the crest and the root of the thread, as measured at a right angle to the axis.
True False
Answer:
Tags
Choose question tag
close menu
arrow
The free diameter of an external 5100-775 retaining ring is 7.243.
True False
Answer:
Tags
Choose question tag
close menu
arrow
Speed of rotation and the actual load applied on the lifter determines the type of follower to be used.
True False
Answer:
Tags
Choose question tag
close menu
arrow
This type of retaining ring does not require any grooves and is used mainly as a positioning and locking device.
Multiple Choice
Answer:
Tags
Choose question tag
close menu
arrow
The most important design criterion for a retaining ring is:
Multiple Choice
Answer:
Tags
Choose question tag
close menu
arrow
The American Standard thread was adopted in 1864 in the United States.
True False
Answer:
Tags
Choose question tag
close menu
arrow
Lead is the distance a screw thread advances axially in one full turn.
True False
Answer:
Tags
Choose question tag
close menu
Showing 1 - 20 of 40