Technical Drawing for Engineering Communication

Engineering

Quiz 14 :

Springs

Quiz 14 :

Springs

Question Type
search
arrow
It is incorrect to dimension both the inside diameter and the outside diameter of a spring on the same drawing.
Free
True False
Answer:

Answer:

False

Tags
Choose question tag
close menu
arrow
Which dimension should be given for the diameter of a spring on a drawing?
Free
Multiple Choice
Answer:

Answer:

D

Tags
Choose question tag
close menu
arrow
If a bumper was to be made of a spring, a torsion spring would be recommended.
Free
True False
Answer:

Answer:

False

Tags
Choose question tag
close menu
arrow
Section lining is illustrated in a large spring where the cutting plane line passes through the center axis of the spring by filling the coils in solid.
True False
Answer:
Tags
Choose question tag
close menu
arrow
If the coil winding direction is not called-off on the drawing, it will be manufactured as:
Multiple Choice
Answer:
Tags
Choose question tag
close menu
arrow
To determine the outside diameter of a spring, measure the wire size, double it, and add it to the inside diameter.
True False
Answer:
Tags
Choose question tag
close menu
arrow
The two general classifications of springs are helical and flat.
True False
Answer:
Tags
Choose question tag
close menu
arrow
A spring is a mechanical device that changes rotational force into linear force.
True False
Answer:
Tags
Choose question tag
close menu
arrow
To find mean diameter, subtract the wire diameter from the outside diameter.
True False
Answer:
Tags
Choose question tag
close menu
arrow
An extension spring would be used to return a jackhammer to its original position.
True False
Answer:
Tags
Choose question tag
close menu
arrow
Which spring type has only one point of contact?
Multiple Choice
Answer:
Tags
Choose question tag
close menu
arrow
The solid length of a compression spring is the length of the spring stretched out straight.
True False
Answer:
Tags
Choose question tag
close menu
arrow
Torsion springs are commonly used to resist twisting.
True False
Answer:
Tags
Choose question tag
close menu
arrow
The "free length" of a spring means the overall length of a spring when it is in free state or unloaded condition.
True False
Answer:
Tags
Choose question tag
close menu
arrow
To measure the free length of a compression spring it must be compressed.
True False
Answer:
Tags
Choose question tag
close menu
arrow
Other than the required dimensions, what spring data must be noted below and to the right?
Multiple Choice
Answer:
Tags
Choose question tag
close menu
arrow
Which type of spring would be required for a spring-loaded pair of wire cutters?
Multiple Choice
Answer:
Tags
Choose question tag
close menu
arrow
If a cutting plane passes through the axis of a small spring, it is drawn with the section area filled in with section lines.
True False
Answer:
Tags
Choose question tag
close menu
arrow
To properly measure the overall length of an extension spring, measure from the inside of the loop or hook.
True False
Answer:
Tags
Choose question tag
close menu
arrow
The length of a spring when a specified load is applied to it is referred to as the loaded length.
True False
Answer:
Tags
Choose question tag
close menu
Showing 1 - 20 of 30