Deck 19: Dental Materials Equipment

Full screen (f)
exit full mode
Question
Which of the following materials would NOT be mixed in a flexible rubber bowl?

A)Stone
B)Plaster
C)Die stone
D)Reversible hydrocolloid
E)Irreversible hydrocolloid
Use Space or
up arrow
down arrow
to flip the card.
Question
The use of a water-cooled tray describes which impression technique?

A)Irreversible hydrocolloid
B)Reversible hydrocolloid
C)Polysulfide
D)Polyester
Question
How should an impression be cared for once it is removed from the mouth?

A)Sterilized
B)Disinfected
C)Submerged in a water bath
D)Rinsed off and poured immediately
Question
Bite registration trays come in a selection of right, left, and anterior.
Question
Which lab instrument is beneficial in separating an impression from the poured and set model?

A)Lab knife
B)Lab spatula
C)Model trimmer
D)Flexible metal spatula
Question
What is the purpose of a vacuum mixing unit?

A)Remove powder dust from the air as the material is mixed.
B)Remove excessive air from the material while mixing.
C)Mix gypsum materials to the proper consistency.
D)All of the above
Question
The automixer is used for which type of material?

A)Alginate (irreversible hydrocolloid)
B)Reversible hydrocolloid
C)Polyvinylsiloxane
D)None of the above.
Question
The flexible alginate spatula does not require sterilization following use.
Question
In the reversible hydrocolloid unit, what should the temperature for the storage bath be?

A)110° F (44° C)
B)150° F (65.5° C)
C)212° F (100° C)
Question
When would one use a triple tray for impressions?

A)To take a maxillary impression along with the occlusal bite.
B)To take a mandibular impression along with the occlusal bite.
C)To take a maxillary impression along with a mandibular impression.
D)To take a maxillary impression, mandibular impression, and an occlusal bite.
E)None of the above.
Question
Which of the following statements is incorrect about the use of a model trimmer?

A)Glasses must be worn when using a model trimmer.
B)Utility gloves must be worn when using a model trimmer.
C)A mask must be worn when using a model trimmer.
D)A splash guard must be in place on the model trimmer.
Question
In the reversible hydrocolloid unit, the temperature for the tempering bath should be

A)110° F (44° C).
B)150° F (65.5° C).
C)212° F (100° C).
Question
Which dental instrument is used to mix materials such as irreversible hydrocolloid and gypsum?

A)Flexible alginate spatula
B)Flexible rubber bowl
C)Mixing gun
Question
Why do impression trays have perforations?

A)Provides for easier clean-up after pouring.
B)Provide adequate air circulation for proper setting times.
C)Allow material to push through the holes, creating a mechanical lock that keeps the material in place.
D)All of the above are correct
Question
Flexible rubber bowls are used to mix which material(s)?

A)Powder and liquid, such as irreversible hydrocolloid (alginate)
B)Plaster or stone for pouring up models
C)Reversible hydrocolloid
D)Polyvinylsiloxane
E)A and B are both correct.
Question
An alginator is used in many dental procedures involving taking an alginate impression.
Unlock Deck
Sign up to unlock the cards in this deck!
Unlock Deck
Unlock Deck
1/16
auto play flashcards
Play
simple tutorial
Full screen (f)
exit full mode
Deck 19: Dental Materials Equipment
1
Which of the following materials would NOT be mixed in a flexible rubber bowl?

A)Stone
B)Plaster
C)Die stone
D)Reversible hydrocolloid
E)Irreversible hydrocolloid
Reversible hydrocolloid
2
The use of a water-cooled tray describes which impression technique?

A)Irreversible hydrocolloid
B)Reversible hydrocolloid
C)Polysulfide
D)Polyester
Reversible hydrocolloid
3
How should an impression be cared for once it is removed from the mouth?

A)Sterilized
B)Disinfected
C)Submerged in a water bath
D)Rinsed off and poured immediately
Disinfected
4
Bite registration trays come in a selection of right, left, and anterior.
Unlock Deck
Unlock for access to all 16 flashcards in this deck.
Unlock Deck
k this deck
5
Which lab instrument is beneficial in separating an impression from the poured and set model?

A)Lab knife
B)Lab spatula
C)Model trimmer
D)Flexible metal spatula
Unlock Deck
Unlock for access to all 16 flashcards in this deck.
Unlock Deck
k this deck
6
What is the purpose of a vacuum mixing unit?

A)Remove powder dust from the air as the material is mixed.
B)Remove excessive air from the material while mixing.
C)Mix gypsum materials to the proper consistency.
D)All of the above
Unlock Deck
Unlock for access to all 16 flashcards in this deck.
Unlock Deck
k this deck
7
The automixer is used for which type of material?

A)Alginate (irreversible hydrocolloid)
B)Reversible hydrocolloid
C)Polyvinylsiloxane
D)None of the above.
Unlock Deck
Unlock for access to all 16 flashcards in this deck.
Unlock Deck
k this deck
8
The flexible alginate spatula does not require sterilization following use.
Unlock Deck
Unlock for access to all 16 flashcards in this deck.
Unlock Deck
k this deck
9
In the reversible hydrocolloid unit, what should the temperature for the storage bath be?

A)110° F (44° C)
B)150° F (65.5° C)
C)212° F (100° C)
Unlock Deck
Unlock for access to all 16 flashcards in this deck.
Unlock Deck
k this deck
10
When would one use a triple tray for impressions?

A)To take a maxillary impression along with the occlusal bite.
B)To take a mandibular impression along with the occlusal bite.
C)To take a maxillary impression along with a mandibular impression.
D)To take a maxillary impression, mandibular impression, and an occlusal bite.
E)None of the above.
Unlock Deck
Unlock for access to all 16 flashcards in this deck.
Unlock Deck
k this deck
11
Which of the following statements is incorrect about the use of a model trimmer?

A)Glasses must be worn when using a model trimmer.
B)Utility gloves must be worn when using a model trimmer.
C)A mask must be worn when using a model trimmer.
D)A splash guard must be in place on the model trimmer.
Unlock Deck
Unlock for access to all 16 flashcards in this deck.
Unlock Deck
k this deck
12
In the reversible hydrocolloid unit, the temperature for the tempering bath should be

A)110° F (44° C).
B)150° F (65.5° C).
C)212° F (100° C).
Unlock Deck
Unlock for access to all 16 flashcards in this deck.
Unlock Deck
k this deck
13
Which dental instrument is used to mix materials such as irreversible hydrocolloid and gypsum?

A)Flexible alginate spatula
B)Flexible rubber bowl
C)Mixing gun
Unlock Deck
Unlock for access to all 16 flashcards in this deck.
Unlock Deck
k this deck
14
Why do impression trays have perforations?

A)Provides for easier clean-up after pouring.
B)Provide adequate air circulation for proper setting times.
C)Allow material to push through the holes, creating a mechanical lock that keeps the material in place.
D)All of the above are correct
Unlock Deck
Unlock for access to all 16 flashcards in this deck.
Unlock Deck
k this deck
15
Flexible rubber bowls are used to mix which material(s)?

A)Powder and liquid, such as irreversible hydrocolloid (alginate)
B)Plaster or stone for pouring up models
C)Reversible hydrocolloid
D)Polyvinylsiloxane
E)A and B are both correct.
Unlock Deck
Unlock for access to all 16 flashcards in this deck.
Unlock Deck
k this deck
16
An alginator is used in many dental procedures involving taking an alginate impression.
Unlock Deck
Unlock for access to all 16 flashcards in this deck.
Unlock Deck
k this deck
locked card icon
Unlock Deck
Unlock for access to all 16 flashcards in this deck.