Deck 1: Introduction: Line Types and Sketching

Question 1

Construction lines are generally erased once the sketch is complete.

Answer 1

False

Question 2

____________________ lines allow dimensions to be shown apart from an object.

Answer 2

Extension

Question 3

On engineering drawings, distances from left to right are referred to as width.

Answer 3

True

Question 4

The acronym for the International Organization for Standardization is ____________________.

Question 5

The most common size for the lettering of notes and dimensions on metric drawings is ____________________ millimeters.

Question 6

A pictorial drawing is similar to a _________________________, because it shows the object as it appears to the eye of the observer.

Question 7

A spherical or circular object, such as a soccer ball or pizza, is usually described by its ____.

A) width
B) height
C) diameter
D) width and height

Question 8

Three types of pictorial sketches are perspective, oblique, and ____.

A) orthographic
B) isometric
C) photographic
D) three-dimensional

Question 9

____ lines show areas not visible in the current view.

A) Straight
B) Hidden
C) Object
D) Extension

Question 10

The most important requirements for lettering on a sketch or technical drawing are legibility and _________________________.

Question 11

The easiest way to draw an accurate circle is to use a compass.

Question 12

The acronym ASME stands for ____.

A) Association for Standards in Mechanical Engineering
B) American Society of Mechanical Engineers
C) American Society of Manufacturing Engineers
D) Association for Standards in Manufacturing Engineering

Question 13

The symbol for the word diameter is D.

Question 14

Producing a technical drawing by showing a number of views of the object as seen from different directions is called _________________________ projection.

Question 15

When looking at an object in person, we normally see it as ____.

A) having width and height
B) having depth and width
C) two-dimensional
D) three-dimensional

Question 16

The abbreviation for inch is ____.

A) in
B) I
C) IN
D) IN.

Question 17

The acronym CSA stands for Canadian Standards Association.