Question 1

A drawing with one surface shown on the plane of the paper and the adjoining surface at an angle is called a(n) __________ drawing.&#10;A) oblique&#10;B) orthographic&#10;C) opaque&#10;D) isometric

Accepted Answer

An oblique drawing is a type of technical drawing where one surface is shown on the plane of the paper and the adjoining surface is at an angle. Orthographic drawings show all three dimensions of an object, opaque refers to the property of not letting light pass through, and isometric drawings show three dimensions at a 120-degree angle.

Question 2

To show all information accurately and to keep all lines and angles in proportion, most construction drawings are drawn by ________________________________________.

Accepted Answer

Orthographic Projection

Question 3

A drawing that shows what would be seen if you stood in front of a house is a(n) ______________________________ drawing.

Accepted Answer

Elevation

Question 4

A drawing that shows what would be exposed if a cut were made through an object is called a(n) ____________________ drawing.

Accepted Answer

The answer of A drawing that shows what would be...

Question 5

A style of drawing in which separate sides of an object are shown as if projected against the inside of a glass box is called __________ projection.&#10;A) oblique&#10;B) orthographic&#10;C) opaque&#10;D) isometric

Accepted Answer

Orthographic projection is a method of representing three-dimensional objects in two dimensions, where the views are projected onto the sides of an imaginary glass box.

Question 6

In an isometric drawing, vertical lines are drawn vertically and horizontal lines are drawn at an angle of __________.&#10;A) 45 &#176; from vertical&#10;B) 30 &#176; from vertical&#10;C) 45 &#176; from horizontal&#10;D) 30 &#176; from horizontal

Accepted Answer

In an isometric drawing, horizontal lines are typically drawn at an angle of 30° from the horizontal to give a three-dimensional representation on a two-dimensional surface.

Question 7

In __________ drawings, the most irregular surface is drawn in proportion as though it were flat against the drawing surface. Parallel lines are added to show the __________ of the drawing

Accepted Answer

The answer of In __________ drawings, the most irregular surface...

Question 8

A view of an object as though the object has been cut in half is called a(n) __________ drawing.&#10;A) elevation&#10;B) plan&#10;C) detail&#10;D) section

Accepted Answer

A section drawing shows an object as though it has been cut in half and is a type of technical drawing used in engineering and architecture.

Question 9

A view of an object as seen from directly above is called a(n) __________.&#10;A) elevation&#10;B) plan&#10;C) detail&#10;D) section

Accepted Answer

A plan view is a drawing that shows a view of an object as seen from directly above. It is commonly used in architecture, engineering, and design to show the layout of a building, room, or object. Elevation drawings show a view of an object from one side, detail drawings focus on a specific part or component of an object, and section drawings show a view of an object as if it has been cut in half.

Question 10

A view of an object as seen from the side and showing the height of the object is called a(n) __________ drawing.&#10;A) elevation&#10;B) plan&#10;C) detail&#10;D) section

Accepted Answer

An elevation drawing shows a view of an object as seen from the side and shows the height of the object. It is often used in architecture to show the exterior of a building.

Deck 18: Views