Deck 3: Service Information, Specifications, Measurements

Question 1

Trim illustrations show how molding and trim pieces attach to the vehicle.

Answer 1

True

Question 2

Mil gauges are sometimes used to measure mechanical parts when high precision is important.

Answer 2

False

Question 3

ASE-Style Multiple Choice ____ are small pictures that represent a location, part, procedures, safety warning, measurement point, or other aspect of repair.

A)Service symbols
B)Flow diagrams
C)Paint codes
D)Refinishing guides

Answer 3

A

Question 4

ASE-Style Multiple Choice The ____ gives information about the finish (paint)and the trim or moldings used on a specific vehicle.

A)body ID number
B)mil gauge
C)conversion chart
D)paint code

Question 5

ASE-Style Multiple Choice ____ give logical steps for finding the source of problems.

A)Repair guides
B)Diagnosis charts
C)Wiring diagrams
D)Flow diagrams

Question 6

Micrometers measure small clearances inside parts.

Question 7

Part location illustrations will often have large arrows that pinpoint part locations, and they sometimes show an enlarged second view of the part detail.

Question 8

VIN abbreviations are a short series of letters that represent technical terms or words.

Question 9

ASE-Style Multiple Choice ____ contain information needed for repainting panels so that the repair has the same appearance as the old finish.

A)Refinishing guides
B)Conversion guides
C)Color matching guides
D)Collision estimating guides

Question 10

ASE-Style Multiple Choice ____ explain paint codes, types of paints, and how to apply and buff paints, and also describe other paint-related information.

A)Conversion guides
B)Refinishing guides
C)Color matching guides
D)Collision estimating guides

Question 11

Measurements are number values that help control repair processes in collision repair.

Question 12

ASE-Style Multiple Choice The ____ is also an alphanumeric code that states what type and color of paint was used during vehicle manufacturing.

A)tram gauge
B)mil gauge
C)paint thickness
D)paint code

Question 13

ASE-Style Multiple Choice ____ are similar to wiring diagrams but show how various fluids or air move through a hydraulic (oil-filled)or pneumatic (air-filled)circuit.

A)Diagnosis charts
B)Flow diagrams
C)Parts interchange guides
D)Refinishing guides

Question 14

ASE-Style Multiple Choice ____ results when you read a rule or scale from an angle instead of looking at it straight down.

A)Diagnosis error
B)Refinishing error
C)Parallax error
D)Wiring error

Question 15

ASE-Style Multiple Choice ____ are handy for changing from one measuring system to another or from one value to another.

A)Parts Interchange guides
B)Conversion charts
C)Collision estimating guides
D)Specifications

Question 16

MSDS service guides give procedures, safety warnings, component locations, and other facts for working on active restraint systems.

Question 17

Special service tools (SSTs)are tools designed to be used for specific repair applications.

Question 18

All automobile companies publish yearly service manuals that describe the construction and repair of their vehicles.

Question 19

Panel welding illustrations give the factory recommended weld count, weld type, and weld locations for replacing structural panels.

Question 20

ASE-Style Multiple Choice A(n)____ is a special body dimension measuring tool.

A)outside caliper
B)VIN plate
C)MSDS
D)tram gauge

Question 21

ASE-Style Multiple Choice ____ basically divide a circle into 360 or more parts called degrees.

A)Angle measurements
B)Flow measurements
C)Inside measurement
D)Outside measurements

Question 22

ASE-Style Multiple Choice While having a discussion, Technician A says that paint thickness is measured in cm. Technician B says that it is measured in liters. Who is correct?

A)A only
B)B only
C)Both A and B
D)Neither A nor B

Question 23

______________________________ give(s)instructions, safety warnings, and technical illustrations for specific makes and models of vehicles.

Question 24

ASE-Style Multiple Choice The tool MOST-Likely used to measure part movement and out-of-round in thousandths of an inch is:

A)the spring scale
B)the dial indicator
C)the feeler gauge
D)the micrometer

Question 25

ASE-Style Multiple Choice ____ are used by paint suppliers and technicians to weigh the various ingredients when mixing paint materials.

A)Pressure gauges
B)Mixing scales
C)Dial thermometers
D)Flow meters

Question 26

What information is typical contained in an airbag service guide?

Question 27

The ___________________________________ is used to find out how and when the vehicle was manufactured.

Question 28

What is the difference between a mercury thermometer and a dial thermometer?

Question 29

______________________________ is designed to help enhance the collision repair facility's productivity, profitability, and customer service by coordinating all aspects of collision repair.

Question 30

______________________________ provides easy access to a user-customized database of recycled parts and suppliers in North America and Canada.

Question 31

ASE-Style Multiple Choice All of the following represent types of calipers EXCEPT:

A)the lateral caliper
B)the inside caliper
C)the outside caliper
D)the hermaphrodite caliper

Question 32

ASE-Style Multiple Choice Which of the following statements is LEAST-Likely true?

A)Standard mixing scales simply weigh each paint ingredient as it is poured into the mixing cup on the scale.
B)Proportional mixing means that for a specific volume of paint or other material, a specific amount of another material must be added.
C)A graduated pail has lines denoting volume for pouring and measuring liquid materials.
D)Computerized intelligent scales allow automated paint mixing.

Question 33

What information is usually included in a vehicle dimension manual or software?

Question 34

What are the advantages of electronic media or computer-based service information over print media?

Question 35

ASE-Style Multiple Choice The term MOST-Likely used to describe an instrument used to measure body temperature when painting is:

A)the pressure gauge
B)the caliper
C)the flow meter
D)the surface thermometer

Question 36

_________________________ are drawings that show the location of electrical components.

Question 37

ASE-Style Multiple Choice Which of the following is LEAST-Likely a type of mil gauge?

A)pencil
B)gauge
C)digital
D)steel

Question 38

Provide definitions for the following terms: dividers, inside calipers, and sliding calipers.

Question 39

ASE-Style Multiple Choice All of the following are measuring tools EXCEPT:

A)the sliding caliper
B)the micrometer
C)the gauge
D)the scuff plate

Question 40

ASE-Style Multiple Choice While having a discussion, Technician A says that excessive pressure can be dangerous or damage parts. Technician B says that low air pressure may keep a tool from working properly. Who is correct?

A)A only
B)B only
C)Both A and B
D)Neither A nor B