Deck 1: Basic Lines and Views

Question 1

When three views are used to describe an object, the ____ view is placed directly above and in line with the front view.

A) top
B) right
C) bottom
D) left

Answer 1

A

Question 2

The ____________________ view usually gives the best indication of the shape and detail of an object.

Answer 2

front

Question 3

All views have a particular position with respect to each other, and have either a horizontal or vertical alignment.

Answer 3

True

Question 4

When three views are used to describe an object, the ____________________ side view is placed to the right of and in line with the front view.

Question 5

____ are made to describe the object in sufficient detail to permit fabrication.

A) Details
B) Plans
C) Drawings
D) Graphs

Question 6

In orthographic projection, the exact form of the object is shown by various views of the object arranged in a particular order.

Question 7

A(n) ____________________ line is a thick solid line.

Question 8

____ lines are fine lines that extend from the object with a slight break between.

A) Extension
B) Object
C) Hidden
D) Dimension

Question 9

There is no limitation on the number of views that may be used to describe an object.

Question 10

____ projection is the method employed to describe the object in sufficient detail to permit fabrication.

A) Sectional
B) Series
C) Drawing
D) Orthographic

Question 11

The ____ break line is a heavy, irregular line drawn freehand.

A) phantom
B) cutting
C) long
D) short

Question 12

A fine, broken line made up of a series of short and long dashes alternately spaced is known as a(n) ____ line.

A) hidden
B) leader
C) center
D) object

Question 13

A broken line of medium thickness is known as a(n) ____ line.

A) hidden
B) object
C) center
D) leader

Question 14

A heavy, broken line made up of a series of long and short dashes alternately spaced is known as a ____ line.

A) break
B) section
C) chain
D) short

Question 15

A series of lines - solid or solid and broken - arranged in specific patterns are known as ____________________ lines.

Question 16

The purpose of a chain line is to indicate the imaginary cut surface referred to by the cutting plane line.

Question 17

A(n) ____________________ line is a light, broken line made up of a series of one long and two short dashes.

Question 18

A fine, straight line with an arrowhead or round solid dot at one end is known as a(n) ____ line.

A) extension
B) leader
C) hidden
D) object

Question 19

The front view always shows the front of the object.

Question 20

The ____ break line is a ruled, light line with freehand zigzags.

A) short
B) long
C) cutting
D) phantom