Question 1

Rankine cycle efficiency of a good Steam&#10;A)15 to 20%&#10;B)35 to 45%&#10;C)70 to 80%&#10;D)90 to 95%

Accepted Answer

The Rankine cycle efficiency of a good steam power plant typically ranges from 35 to 45%. This efficiency is influenced by factors such as the steam pressure and temperature, and the efficiency of the turbines and other components.

Question 2

A simple Rankine cycle operates the Boiler at 3 MPa with an outlet temperature of 350°C and the Condenser at 50 kPa. Assuming ideal operation and processes, what is the thermal efficiency of this cycle?

A)7.7
B)17.7
C)27.7
D)37.7

27.7

Accepted Answer

The thermal efficiency of an ideal Rankine cycle can be calculated using the formula: $\eta = 1 - \frac{q_{out}}{q_{in}}$, where $q_{out}$ and $q_{in}$ are the heat rejected in the condenser and the heat added in the boiler, respectively. These values depend on the specific enthalpies at different points in the cycle, which can be found using steam tables for the given pressures and temperatures. Without performing the specific calculations here, the efficiency of a typical Rankine cycle under these conditions (high boiler pressure and temperature, and relatively low condenser pressure) would be expected to be in the range of 30-40%, making option C (27.7%) the most plausible answer given the options.

Question 3

On what basis are fire and water tube boilers are classified?&#10;A)depending the combustion products formed&#10;B)depending the state of fuel&#10;C)depending on the steam formation rate&#10;D)depending tubular heating surface

Accepted Answer

Fire and water tube boilers are classified based on the configuration of the tubular heating surface through which heat from the combustion gases is transferred to the water to generate steam.

Question 4

Cornish boiler is an example of which type of boiler?&#10;A)fire tube boiler&#10;B)water tube boiler&#10;C)vertical tube boiler&#10;D)externally fired boiler

Accepted Answer

The Cornish boiler is a type of fire tube boiler where hot gases pass through tubes and water surrounds them.

Question 5

Stirling boiler is an example of which type of boiler?&#10;A)inclined tube boilers&#10;B)mobile boiler&#10;C)fire tube boiler&#10;D)water tube boiler

Accepted Answer

Stirling boiler is an example of a water tube boiler, where the water is contained inside the tubes and the hot gases pass around them.

Question 6

Which of these is a stationary boiler?&#10;A)locomotive boiler&#10;B)marine boiler&#10;C)mobile boiler&#10;D)babcock-wilcox boiler

Accepted Answer

The Babcock-Wilcox boiler is a stationary boiler, designed for stationary installations such as power plants, where it is used for steam generation. Unlike locomotive or marine boilers, which are designed to be mobile and are used on trains and ships respectively, the Babcock-Wilcox boiler is intended for fixed installations.

Question 7

Which of these is a mobile boiler?&#10;A)lancashire boiler&#10;B)stirling boiler&#10;C)locomotive boiler&#10;D)cochran boiler

Accepted Answer

Locomotive boilers are specifically designed for use in locomotives, making them mobile by nature as they are built to provide steam power for train movement.

Question 8

Are boilers defined on the basis of heat source.

Accepted Answer

Boilers can be classified based on the heat source they use, such as gas, oil, electricity, or solid fuels.

Question 9

What is the steam pressure limit of natural circulation boilers?&#10;A)650bar&#10;B)180bar&#10;C)400bar&#10;D)550bar

Accepted Answer

Natural circulation boilers typically operate at a steam pressure limit of up to 180bar. Higher pressures may require forced circulation methods.

Question 10

Which of the given boilers operate above critical pressure?&#10;A)natural circulation boilers&#10;B)forced circulation boilers&#10;C)once-through boilers&#10;D)water tube boilers

Accepted Answer

Once-through boilers operate above critical pressure, where water is converted to steam in a single pass without recirculation.

Question 11

Which type of boilers are called drum-less boilers?&#10;A)natural circulation boilers&#10;B)fire tube boilers&#10;C)positive forced circulation boiler&#10;D)forced circulation boiler

Accepted Answer

The answer of Which type of boilers are called drum-less...

Question 12

Chances of sediments depositing inside the water tubes in the shell is less due to?&#10;A)low working pressure&#10;B)natural circulation of water&#10;C)partial circulation of water&#10;D)high working pressure

Accepted Answer

The answer of Chances of sediments depositing inside the water...

Question 13

Out of the given option choose the advantage that supports fire tube boilers?&#10;A)water circulation is cyclic&#10;B)used as a mobile boiler&#10;C)water circulation is limited inside boiler shell&#10;D)bursting of flue tube does not cause any explosion

Accepted Answer

The answer of Out of the given option choose the...

Question 14

Apart from feedheating, what should a plant have to obtain a gain in thermal efficiency?&#10;A)lubrication&#10;B)differential heating&#10;C)reheating cycles&#10;D)regenerative cycles

Accepted Answer

The answer of Apart from feedheating, what should a plant...

Question 15

Which of the following needs to be incorporated to prevent the low pressure turbine exhaust wetness from being excessive?&#10;A)double regeneration&#10;B)double carnotization&#10;C)double reheat&#10;D)double cooling

Accepted Answer

The answer of Which of the following needs to be...

Question 16

What is the critical point of steam generation in a &#34;once through&#34; boiler?&#10;A)221.5 bar&#10;B)221.4 bar&#10;C)221.3 bar&#10;D)221.2 bar

Accepted Answer

The answer of What is the critical point of steam...

Question 17

In a typical layout of a 215MW reheat power plant, the feed in the boiler is at?&#10;A)280 degree centigrade&#10;B)230 degree centigrade&#10;C)238 degree centigrade&#10;D)250 degree centigrade

Accepted Answer

The answer of In a typical layout of a 215MW...

Question 18

The input to the low pressure feedwater heater is from?&#10;A)drain heater&#10;B)drain cooler&#10;C)drain pipe&#10;D)none of the mentioned

Accepted Answer

The answer of The input to the low pressure feedwater...

Question 19

The best capable alternative source which can meet the future energy demand is&#10;A)thermal power plant&#10;B)nuclear power plant&#10;C)hydroelectric power plant&#10;D)geothermal power plant

Accepted Answer

The answer of The best capable alternative source which can...

Deck 1: Boiler Efficiency and Classification