Deck 11: Programming Timers

ملء الشاشة (f)
exit full mode
سؤال
When a timer uses the format used by the Allen-Bradley timer, the preset time can be programmed with any value from 0 to 16,000.
استخدم زر المسافة أو
up arrow
down arrow
لقلب البطاقة.
سؤال
When circuit requirements demand more time than is available from a single timer, two or more timers can be programmed together.
سؤال
Retentive timers (RTO) can be programmed to replace ____________________ timers.
سؤال
The retentive timer lets the timer START and STOP without resetting the accumulated value to 0.
سؤال
What format is used by the Allen-Bradley timer?
سؤال
What happens when the timer rung goes false in an RTO?
سؤال
What is normal for contacts?
سؤال
The basic pneumatic timing relay is designed so that additional instantaneous contacts may be added.
سؤال
Describe the similarities and differences of the Allen-Bradley Logix5000 Timer and the Allen-Bradley timers discussed in the text.
سؤال
In an RTO, bit 13 is known as the ____________________ bit.
سؤال
Programming two or more timers together to extend the timing range is called ____________________.
سؤال
What happens as long as the rung remains true after the RTO instruction begins timing in an RTO?
سؤال
A common problem in programs that have ____________________ timers is that the timer is not accumulating time, even though the timer rung is true.
سؤال
With the ON delay timer, the delay in contact operation begins before the timer coil has been energized, or turned ON.
سؤال
To avoid confusion when reading electrical drawings with OFF delay contacts, it must be remembered that normal refers to the coil ____________________ it has been deenergized.
فتح الحزمة
قم بالتسجيل لفتح البطاقات في هذه المجموعة!
Unlock Deck
Unlock Deck
1/15
auto play flashcards
العب
simple tutorial
ملء الشاشة (f)
exit full mode
Deck 11: Programming Timers
1
When a timer uses the format used by the Allen-Bradley timer, the preset time can be programmed with any value from 0 to 16,000.
False
2
When circuit requirements demand more time than is available from a single timer, two or more timers can be programmed together.
True
3
Retentive timers (RTO) can be programmed to replace ____________________ timers.
motor-driven,motor driven
4
The retentive timer lets the timer START and STOP without resetting the accumulated value to 0.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
5
What format is used by the Allen-Bradley timer?
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
6
What happens when the timer rung goes false in an RTO?
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
7
What is normal for contacts?
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
8
The basic pneumatic timing relay is designed so that additional instantaneous contacts may be added.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
9
Describe the similarities and differences of the Allen-Bradley Logix5000 Timer and the Allen-Bradley timers discussed in the text.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
10
In an RTO, bit 13 is known as the ____________________ bit.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
11
Programming two or more timers together to extend the timing range is called ____________________.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
12
What happens as long as the rung remains true after the RTO instruction begins timing in an RTO?
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
13
A common problem in programs that have ____________________ timers is that the timer is not accumulating time, even though the timer rung is true.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
14
With the ON delay timer, the delay in contact operation begins before the timer coil has been energized, or turned ON.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
15
To avoid confusion when reading electrical drawings with OFF delay contacts, it must be remembered that normal refers to the coil ____________________ it has been deenergized.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
locked card icon
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.